EasyManua.ls Logo

Schroeder America 925 User Manual

Schroeder America 925
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Please refer to the Schroeder America website (www.schroederamerica.com)
for information relating to Schroeder America installation and Service
Manuals, Instruction Sheets, Technical Bulletins, Service Bulletins, etc.
NOTICE:
The information contained in this document is subject to change without notice.
SCHROEDER AMERICA MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THIS MATERIAL, INCLUDING,
BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. SCHROEDER AMERICA shall not be liable for errors contained herein or for incidental consequential
damages in connection with the nishings, performance, or use of this material.
This document contains proprietary information which is protected by copyright. All right reserved.
© Copyright 2015 by Schroeder America, all rights reserved.
THIS DOCUMENT CONTAINS IMPORTANT INFORMATION
This manual must be read and understood before the installation and operation of this dispenser.
Schroeder America
5620 Business Park • San Antonio, TX 78218
210.662.8200 • Fax: 210.667.2600 • www.schroederamerica.com
Toll-Free 877.404.2488
Rev: 7/15
PN: 805-0011
INSTALLATION INSTRUCTION, PARTS LIST
AND CONFIGURATION GUIDE
FOR THE
PEPSI 2V TEA DISPENSER
Dispenser Model No. 925
PATENT NUMBERS: UK GB2489844; UK GB2495228; US 8,955,723; US D696,887; US 9,016,509 B2

Questions and Answers:

Schroeder America 925 Specifications

General IconGeneral
BrandSchroeder America
Model925
CategoryDispenser
LanguageEnglish

Summary

Dispenser Dimensions and Weight

Water and Syrup Requirements

Installation

Drain Attachment

Details on attaching the drain tube to the dispenser unit for proper drainage.

Urn/Base Mounting

Instructions for mounting the dispenser base to the countertop, including sealing.

Ratio/Brix Adjustment

Adjust Water Flow Rate

Procedure to adjust water flow rate for the dispenser using a graduated cylinder.

Adjust Flow Control Assembly

Guide to adjusting flow control screws for water and syrup, noting differences in screw types.

Achieve Proper Water Flow Rate

Details on adjusting the flow control module's yellow/green screw for optimal water flow.

Cleaning and Sanitizing

Cleaning Solutions

Recommended mixtures and temperatures for cleaning solutions for internal and external parts.

Internal Cleaning Procedure

Step-by-step guide for cleaning the inside of the tea urn, including drying.

External Cleaning Procedure

Method for cleaning the stainless steel urn using mild detergent and avoiding abrasives.

Sanitizing Procedure

Steps for sanitizing concentrate circuits, including solution preparation and flushing.

Troubleshooting Guide

No Water Dispensed

Checks for common causes of no water dispensing, such as supply, shut-off, or blockages.

No Syrup Dispensed

Troubleshooting steps for no syrup, including CO2 pressure, product, and line issues.

Weak Product Taste

Reasons for weak taste, focusing on ratio/brix, shut-off, and syrup supply checks.

Strong Product Taste

Causes for strong taste, including ratio/brix, CO2, and water supply issues.

2V Scalloped Can Assembly Diagram

Flow Control Assembly Diagram

Post Mix Valve Assembly Diagram

Shank and Tube Assembly

Available Accessories

Limited Commercial Warranty

Related product manuals