Schüco DCS - Innensprechstelle Schüco DCS Touch Display; Preconfigured wall intercom station

Schüco de
Commissioning instructions – Schüco DCS Touch Display 17
Dok-Nr.10000432116_01
6. IP secure connector
INFORMATION
The DCS Touch Display can also be operated without the IP secure connector. Note that a suitable
PoE+ switch must be provided by the customer in this case. If no IP secure connector is provided
for the installation, you can skip this chapter.
The IP secure connector (Art. No. 263 268) is an optional device for greater output and safety.
It protects the household electricity supply from unauthorised external manipulation attempts.
In cases of unauthorised removal, the DCS Touch Display disconnects from the network.
The IP secure connector also guarantees secure control of electric strikes and electric locks.
It is recommended that you use the IP secure connector on all external doors.
INFORMATION
The IP secure connector must be installed on the inside of the building. .
For perfect operation of the IP secure connector, connection to the Schüco DCS Touch Display
is required. .