Schüco DCS - Schüco DCS Pfosten Montagekonzept; Simplified installation concept

Schücode Commissioning instructions – Schüco DCS Touch Display
10
Dok-Nr.10000432116_01
2.3. Proper use
The DCS Touch Display is a modular intercom station that is based on SIP technology
(RFC 2327, RFC 2396, RFC 2617, RFC 2833, RFC 2876, RFC 3261, RFC 3310 and RFC 3550).
It is intended for door communication inside and outside as well as for access control.
The DCS Touch Display must be ush-tted, whereby it is integrated into the existing DCS prole,
for example, or alternatively installed on a panel or a wall. In addition to the 4.3 inch colour
touchscreen, it has a camera with motion detection, two voice-optimised microphones and a protected
loudspeaker. Thanks to state-of-the-art technology, the DCS Touch Display uses very little energy,
despite its wide range of functions. It can be combined with a Schüco DCS motion detector,
Schüco DCS LED spotlight and DCS proximity switch, for example. Proper use also includes adhering
to the installation and commissioning instructions. Any alternative use or a use beyond this remit is not
in accordance with its purpose. Incorrect use or unauthorised modication of the product may result in
death or serious injury, or damage to the product and other material assets.
The manufacturer / supplier shall not be liable for any resulting damage. The user alone bears the
risk. Only original replacement parts may be used.
Children should be supervised to ensure that they do not play with the device. .