Schüco de
Commissioning instructions – Schüco DCS Touch Display 11
Dok-Nr.10000432116_01
2.4. General safety instructions
Follow the safety instructions in this document so as not to endanger your own life or that of others
and to ensure error-free operation.
DANGER
Imminent danger resulting in death or severe injuries.
► Before any work is carried out on the product, all power packs must be disconnected and
protected against anyone inadvertently switching them back on.
► Following each installation or alteration to the electrical system, carry out a test run to test all
functions.
► When operating, note that Schüco windows and doors may open and close automatically when
left unattended.
For reasons of simplicity, this documentation does not contain every detail of all product types and it
cannot cover every possible installation, operation or maintenance scenario.
Should you require further information or encounter problems not dealt with in detail in these
installation instructions, contact technical support +49 (0) 521 783 – 665. Moreover, we would like
to point out that these installation instructions do not form part of or replace any previous or existing
agreement or contract.
All obligations to be fullled by Schüco can be found in the appropriate sales contract, which also
contains the complete current conditions of the warranty. These installation instructions do not add to
or limit the contractual warranty conditions. .
To Next Page
Loading...