EasyManua.ls Logo

Schüco DCS - Page 104

Schüco DCS
138 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Fingerprint system
Fingerprintsysteme
Radio-contr. systems
Funksysteme
Emergency exit switch
Fluchttürsicherung
ZutrittskontrolleAccess control
D 3-8
07.2016 / 54105
Produktübersicht • Product overview
Schüco Türmodul
„Fluchttürsicherung“
Dieses in das Türprol integrierbare Modul
bietet Sicherheit gegen den Missbrauch von
Türen in Flucht- und Rettungswegen nach
Richtlinien der EltVTR. Die im Normalbetrieb
durch das elektrische Verriegelungselement
gesicherte Tür kann im Panikfall über den
Schüco Not-Taster freigegeben und geöffnet
werden. Durch Betätigung des Schüco
Not-Tasters wird dann, wie auch bei miss-
bräuchlicher Öffnung der Tür, ein optischer und
akustischer Alarm ausgelöst.
Über einen prolintegrierten Schlüsselschalter
lässt sich die Tür zur Einmalbegehung
(Kurzzeitfreigabe) oder zur Tagesoffeneinstel-
lung (Dauerfreigabe) freigeben oder der Alarm
quittieren.
Alle Komponenten zum Türeinbau sind durch
Mikroschalter sabotageüberwacht.
1)
Prolintegriert, bei geschlossener Tür
2)
Nicht kondensierend
1)
Integrated in the prole when the door is closed
2)
Non-condensing
Schüco “emergency exit switch”
door module
This module, which can be integrated in the
door prole, provides protection against misuse
of doors on emergency and escape routes in
accordance with EltVTR. A door secured in the
normal way with the electric locking unit can be
released and opened in an emergency using
the emergency button. Operating the
emergency button then triggers a visual and
audible alarm, as is also the case if the door is
used improperly
The door can be released for one-time entry
(short-term release) or daytime open mode
(long-term release), or the alarm switched off
using a key-operated switch integrated in the
prole
All components for installing the door are
monitored by microswitches to detect any
tampering
Technische Daten Technical data
Art.-Nr.
Art. No.
Eingangsspannung 24 V DC Input voltage
242 555 1
Eingangsstrom 0.12 A Input current
Schutzart IP 54
1)
Protection rating
Relative Luftfeuchtigkeit 93 %
2)
Relative humidity
Betriebstemperatur
-20 °C bis +70 °C
-20 °C to +70 °C
Operating temperature

Other manuals for Schüco DCS