EasyManua.ls Logo

Schüco DCS - Schüco IP Secure Connector; Secure connection and control

Schüco DCS
138 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Introduction
Einleitung
DCS Touch Display
DCS Touch Display
Access control
Zutrittskontrolle
Emergency exit switch
Fluchttürsicherung
Door communication
Türkommunikation
Components
Komponenten
Accessories
Zubehör
Schüco Door Control System (DCS)
C 2-4
07.2016 / 54105
Systembeschreibung • System description
Schüco Door Control System (DCS)
Schüco Door Control System (DCS)
Schüco IP Secure Connector
Mit dem Schüco IP Secure Connector können z.B.
Motorschlösser vom geschützten Innenbereich sicher vom
Schüco DCS Touch Display aus angesteuert werden.
Das Schüco DCS Touch Display wird mit dem
Schüco IP Secure Connector verheiratet, dass eine
verschlüsselte Kommunikation erfolgt.
Wird das Schüco DCS Touch Display widerrechtlich entfernt,
wird die Netzwerkverbindung vollständig reversibel ab dem
Schüco IP Secure Connector weg geschaltet. Dies bedeutet,
dass eine physikalische Netzwerkleitung im Prol vorhanden ist,
dass jedoch keine Daten im Außenbereich ankommen.
Der Schüco IP Secure Connector verfügt über Ein- und
Ausgänge, an welchem zum Beispiel ein Motorschloss
angeschlossen werden kann. Es ist auch möglich eine
Alarmanlage per Codeeingabe am Schüco DCS Touch Display
zu aktivieren/deaktiveren.
Schüco IP secure connector
With the Schüco IP secure connector, electric locks, for
example, can be controlled securely from the protected inside
area using the Schüco DCS touchscreen.
The Schüco DCS touchscreen is paired with
the Schüco IP secure connector to enable encrypted
communication.
If the Schüco DCS touchscreen is removed illegally, the network
connection from the Schüco IP secure connector is
switched off – an operation which is fully reversible. This means
that there is a physical network cable in the prole, but no data
enters the outside area.
The Schüco IP secure connector is equipped with inputs and
outputs to which, for example, an electric lock can be
connected. It is also possible to activate/deactivate an alarm
system by entering a code on the Schüco DCS touchscreen.

Other manuals for Schüco DCS