Need help?Do you have a question about the Schüco SB 1200 and is the answer not in the manual?
Describes the intended use of the inverter and its limitations.
Details critical safety measures to prevent injury and damage.
Explains normal operating states indicated by LEDs.
Details critical and non-critical failure conditions and indicators.
Indicates insulation fault or defective varistor.
Indicates a fault on the DC side.
Indicates permanent disable mode.
Indicates a grid fault.
Indicates a grid impedance issue.
How warnings are displayed, allowing continued grid feed.
How disturbances are displayed, stopping grid feed.
Lists and explains various error messages and their corrective actions.
To Next Page
General