Schüco SB 3000 - Page 37

SMA Solar Technology AG Measurement Channels and Messages
User Manual SB_SMC_Schueco-BEN093730 37
MWE Defect DC Internal measurement comparison fault or hardware defect.
Corrective measures
• Please contact your installer or the SMA Solar Technology
Serviceline if this problem recurs.
MSD-dI Internal measurement comparison fault or hardware defect.
Corrective measures
• Please contact your installer or the SMA Solar Technology
Serviceline if this problem recurs.
MSD-FAC Internal measurement comparison fault or hardware defect.
Corrective measures
• Please contact your installer or the SMA Solar Technology
Serviceline if this problem recurs.
MSD-Vac Internal measurement comparison fault or hardware defect.
Corrective measures
• Please contact your installer or the SMA Solar Technology
Serviceline if this problem recurs.
MSD-Timeout /
NUW-Timeout
Internal measurement comparison fault or hardware defect.
Corrective measures
• Please contact your installer or the SMA Solar Technology
Serviceline if this problem recurs.
MSD-Zac Internal measurement comparison fault or hardware defect.
Corrective measures
• Please contact your installer or the SMA Solar Technology
Serviceline if this problem recurs.
Offset Fault in the acquisition of measurement data.
Corrective measures
• Please contact your installer or the SMA Solar Technology
Serviceline if this problem recurs.
PowerBalance The Sunny Mini Central is part of a three-phase system with two further
Sunny Mini Centrals. This is equipped with the SMA Power Balancer for
preventing unbalanced loads. The operating parameter "PowerBalancer"
is set to "PhaseGuard" or "FaultGuard".
Corrective measures
• For more detailed descriptions of the operation modes
„PhaseGuard“ and „FaultGuard“ please refer to
Section 6.2 "Status Messages" (page29) under „Balanced“.
Message Description and corrective measure