To Next PageTo Next PageWhat to do if the schulink SC1344 Battery Charger displays “CHARGE ABORTED-BAD BATTERY”?
If the red LED is solid and the display shows “CHARGE ABORTED-BAD BATTERY”, the battery may be faulty or too large for the charger. Disconnect the charger from the AC outlet, remove the clamps, and discontinue charging. Have the battery checked or replaced, or consider using a charger with a higher amp rate.
What to do if my schulink SC1344 won't turn on even when properly connected?
If the Battery Charger fails to turn on despite being properly connected, the AC outlet may be dead or there may be a poor electrical connection. Check the fuse or circuit breaker supplying the AC outlet. Also, inspect the power cord and any extension cords for loose plugs.
What to do if my schulink SC1344 display scrolls 'CONNECT BATTERY'?
If the display scrolls “CONNECT BATTERY”, it indicates a poor connection or a blown fuse. Check the connections at the battery and frame to ensure they are secure. Replace the in-line fuse for the ring connector or the 12V accessory plug connector.
General| Brand | schulink |
|---|---|
| Model | SC1344 |
| Category | Battery Charger |
| Language | English |
Guidelines for safe charger operation, including handling, extension cords, and maintenance to prevent hazards.
Critical warning about explosive gases from batteries and precautions to prevent ignition.
Precautions for personal safety when working with batteries, including protective gear, water, and avoiding sparks.
Information on compatible batteries, charging frozen batteries, and California Proposition 65 warning.
Detailed steps for connecting the charger to a vehicle with a negative ground system.
Steps for connecting the charger to a vehicle with a positive ground system.
Procedure for connecting the charger to a battery when it is outside of a vehicle.
How to navigate the app and understand the status screen elements like charge ring and time.
Explanation of app indicators for wireless connection, AC power, battery connection, voltage, and amps.
Detailed explanation of the 8 stages of the automatic charging process.
Table of common problems, possible causes, and solutions for charger operation.
Details of the one-year limited warranty, including coverage, limitations, and disclaimers.
