Product Description
SCHULTE freedomRail Training Manual Page 3
Profile Shelving
Wood Shelving
Rod Clip
•Rod Clips are inserted into 12" and 16" VSBs in order to
support Clothes Rods. Patented open-slide design allows
easy passage of hangers. Rod Clips are simply inserted into
the opening on the underside of the brackets and then snap
into place.
•Available in nickel or chrome
•Part Number: (7913,7910)-1500-(34,36)
Clothes Rods
• Chrome Rods simply snap into Rod Clips to provide a
continuous-slide hanging rod anywhere within the closet.
•Constructed of heavy gage 1" tubing in either chrome or
nickel.
•Part Number: 7913-(1524,1530,1536,1548,1572,1596)-
(34,36)
Rod Stops
•Rod Stops provide a convenient and secure "stop" for
hangers gliding along the Clothes Rod.
•Snap easily into open ends of Clothes Rod, secured with a
simple twist, and is finished in either chrome or nickel for an
upscale look.
•Part Number: 7913-1510-(34,36)
Profile Shelves are constructed of heavy gage steel with a durable baked on epoxy finish. Each
Profile Shelf has double bars both front and rear for added strength. The low "profile" front lip
allows more storage space between shelves. Profile Shelves snap securely into VSBs and are
used either as storage shelves, or as hanging shelves with the addition of Rod Clips and
Chrome Rod.
Depth Length Part Number
9” 96” 1813-2096-(11,45)
12”
24”, 30”, 36”, 48”, 72”
and 96”
1813-(1224,1230,1236,1248,1272,1296)-
(11,45)
16”
24”, 30”, 36”, 48”, 72”
and 96”
1813-(1424,1430,1436,1448,1472,1496)-
(11,45)
20” 96” 1813-2096-(11,45)
•Available in White and Nickel
5/8” Wood Shelving is constructed of melamine laminated particleboard with 1.4mm radius
edgeband on three sides. Wood Shelves are supported by SSBs.
Depth Length Part Number
8” 24”, 48” and 96” 7313-(0824,0848,0896)-(11,24,27)
12” 24”, 36”, 48” and 96” 7313-(1224,1236,1248,1296)-(11,24,27)
14”
24”, 30”, 36”, 48” 72”
and 96”
7313-(1424,1430,1436,1448,1472,1496)-
(11,24,27)
•Available in White, Maple and Cherry
To Next Page
Loading...