Product Description
SCHULTE freedomRail Training Manual Page 2
Hanging Rail
•The Hanging Rail is the primary support component of
the freedomRail Garage system. Once mounted to the
wall, all other components simply hang from the Hanging
Rail. Constructed of heavy duty 12 gage steel with a
durable baked-on epoxy finish.
•Beveled at the top to allow optional mounting into sill
plate at ceiling height.
•Available in 24”, 40”, 64”, and 80” lengths, in White and
Nickel.
•Part Number: 7913-(4424,4440,4464,4480)-(11,45)
Hanging Upright
•Hanging Uprights are hung from the Hanging Rail.
Double-slotted design accepts Brackets along 1”
increments. Constructed of heavy duty 12 gage steel
with a durable baked-on epoxy finish.
•Uprights may be permanently attached to the wall
(optional) using 7913-9137-11 Wall Screws, Anchors,
and Spacers, or left unattached for greater adjustability
•Available in 30”, 48”, 78”, or 90” lengths, in White and
Nickel
•Part Number: 7913-(3530,3548,3578,3590)-(11,45)
Shelving Bracket
•Shelving Brackets come in two types--Ventilated
Shelving Brackets (VSBs) and Solid Shelving Brackets
(SSBs). Constructed of heavy duty steel in a double-body
design.
•VSBs lock securely into the Uprights and support Profile
Shelves and Open Slide® II Shelves. VSBs are specially
designed to receive Rod Clips that support Chrome Rods.
•SSBs also lock securely into the Hanging Uprights, and
support solid wood, glass, or melamine shelves. Shelves
may be securely fastened to SSBs with one of several
available hardware items.
•Part Number: VSB-(7913,7910)-
(1309,1313,1412,1416,1320)-(11,45)
SSB-(7913,7910)-
(1004,1006,1008,1010,1012,1413,1014,1114,1118,1124)-
(11,45)
To Next Page
Loading...