To Next PageTo Next Page
Need help?Do you have a question about the Schulz MSV 20 MAX and is the answer not in the manual?
Guidance on placing the compressor in a well-ventilated, dust-free area, ensuring proper airflow and maintenance access.
Instructions for connecting the compressor to the power supply, adhering to country-specific low voltage electrical standards.
Steps for the first start, including checking oil level and running the compressor for 10 minutes to ensure lubrication.
Procedure for starting the compressor, running it for 10 minutes to achieve optimal lubrication and pressure.
Visual inspection, oil level check, draining moisture, and checking for unusual vibration or noise.
Cleaning intake filters, checking V-belt tension, external cleaning, and testing the ASME safety valve.
System air leakage check, pressure switch operation verification, and checking for oil contamination.
Replacing air filter element, tightening bolts/nuts, and checking oil more frequently in dirty environments.
Testing/calibrating pressure switch, gauge, safety valve, and inspecting/cleaning valve plates.
Recommended oil change intervals: after 8 hours, 40 hours, then every 200 hours or 60 days.
Guidance on selecting appropriate industrial oils based on ambient temperature for Schulz air compressors.
Guidance on placing the compressor in a well-ventilated, dust-free area, ensuring proper airflow and maintenance access.
Instructions for connecting the compressor to the power supply, adhering to country-specific low voltage electrical standards.
Steps for the first start, including checking oil level and running the compressor for 10 minutes to ensure lubrication.
Procedure for starting the compressor, running it for 10 minutes to achieve optimal lubrication and pressure.
Visual inspection, oil level check, draining moisture, and checking for unusual vibration or noise.
Cleaning intake filters, checking V-belt tension, external cleaning, and testing the ASME safety valve.
System air leakage check, pressure switch operation verification, and checking for oil contamination.
Replacing air filter element, tightening bolts/nuts, and checking oil more frequently in dirty environments.
Testing/calibrating pressure switch, gauge, safety valve, and inspecting/cleaning valve plates.
Recommended oil change intervals: after 8 hours, 40 hours, then every 200 hours or 60 days.
Guidance on selecting appropriate industrial oils based on ambient temperature for Schulz air compressors.
General| Brand | Schulz |
|---|---|
| Model | MSV 20 MAX |
| Category | Compressor |
| Language | English |
