To Next PageTo Next PageWhat to do if my Schumacher Electric SL176 Work Light does not operate?
If your Schumacher Electric Work Light isn't working, it could be due to a discharged or faulty battery. First, recharge the battery fully. If that doesn't solve the issue, a qualified technician should replace the battery.
Why my Schumacher Electric SL176 is not turning on?
Your Schumacher Electric Work Light might not be turning on because the battery is either not charged or is defective. Try fully recharging the battery. If the light still doesn't work, have a qualified service technician replace the battery.
How to fix a Schumacher Electric SL176 that won't turn on?
To fix a Schumacher Electric Work Light that won't turn on, the first step is to recharge the battery completely, as it may be discharged. If the issue persists after recharging, it's likely that the battery is bad and needs replacement by a qualified service technician.
General| Brand | Schumacher Electric |
|---|---|
| Model | SL176 Series |
| Category | Work Light |
| Language | English |
This manual contains important safety and operating instructions for the work light.
Failure to follow instructions may result in personal injury or property damage.
Charge after purchase, each use, and every 3-6 months to maintain battery capacity.
Do not look directly into the light or shine it into the eyes of any person or animal.
Do not operate if damaged; take to a qualified service person.
Use only the supplied charger to avoid risk of fire, injury, or property damage.
Do not use a charger with a damaged cord or plug; replace immediately.
Do not immerse the work light in water.
AC charger is for indoor use only; do not expose to water or damp conditions.
Do not open or disassemble the work light; seek qualified service for repairs.
Do not crush, puncture, short external contacts, or dispose of in fire or water.
Wash skin with soap/water; rinse eyes with water and seek immediate medical attention.
Use appropriate extinguishers for lithium ion battery fires; do not move hot product.
Charge the work light immediately after purchase and before first use.
Ensure the internal battery is charged before operating the work light.
Press the Power Level button to cycle through light modes (1, 2, or 3 lights).
Check if the battery is charged or if it needs replacement by a qualified technician.
Warrants work light for one year against defective material or workmanship under normal use.
Warranty void if product is misused, handled carelessly, repaired by unauthorized persons, or resold.
