Need help?Do you have a question about the Schumacher CarQuest CBC-1000 and is the answer not in the manual?
General| Type | Automatic Battery Charger |
|---|---|
| Input Voltage | 120V AC |
| Input Frequency | 60Hz |
| Output Voltage | 12V DC |
| Output Amperage | 10A |
| Battery Type | AGM, Standard, Gel |
| Cable Length | 6 feet |
Manual contains safety and operating instructions for Model CBC-1000.
Do not expose the charger to rain or snow.
Use only manufacturer-recommended attachments to prevent hazards.
Pull the plug, not the cord, to avoid damage.
Use correctly sized and wired extension cords if absolutely necessary.
Do not use a damaged charger; seek professional service.
Follow instructions to prevent battery explosions and hazards from explosive gases.
Never smoke or allow sparks/flames near batteries or engines.
Use charger only for lead-acid batteries; not for dry-cell or other systems.
Do not attempt to charge a battery that is frozen.
Connect/disconnect clips only after turning charger off and unplugging AC cord. Never let clips touch.
Connect RED clip to POSITIVE battery post and BLACK clip to chassis away from battery.
Connect BLACK clip to NEGATIVE battery post and RED clip to chassis away from battery.
Turn switches off, disconnect AC cord, remove chassis clip, then battery clip.
Follow steps to prevent sparks near the battery during charging.
Ensure adapter's ground connection is properly grounded to the outlet plate screw.
Manual chargers require monitoring to prevent overcharging and potential damage.
Unplug and disconnect the charger before performing any maintenance.
Check battery condition, connections, voltage, and clip cleanliness before assuming a faulty charger.
To Next Page