To Next PageTo Next PageWhat to do if the red LED is lit or Schumacher Inverter does not function?
If the red LED is lit or your Schumacher Inverter isn't working, the issue might be poor contact at the terminals or a blown fuse. Try unplugging and reinserting the 12V plug. Also, check the section about fuse blows and the LED indicator and shutdown protection section to resolve this issue.
General| Model | XI15 |
|---|---|
| Type | Power Inverter |
| Continuous Power | 1500 Watts |
| Peak Power | 3000 Watts |
| Output Voltage | 120V AC |
| Output Waveform | Modified Sine Wave |
| Input Voltage | 12V DC |
| Overload Protection | Yes |
| AC Outlets | 2 |
| Low Battery Alarm | Yes |
| Overheat Protection | Yes |
| Cooling | Fan |
| Output Frequency | 60 Hz |
Prohibits operation if the converter or connected devices/surfaces are wet due to electrocution risk.
Instructs to connect only to a 12V accessory outlet or 12V battery.
Details connecting the converter to a vehicle's 12V accessory outlet, including removing the lighter.
Explains plugging the device into the converter and then turning the device on.
Explains the meaning of the Red LED and conditions causing converter shutdown (low/high voltage, overload, heat).
Explains common causes of blown fuses (reverse polarity, short circuit) and how to replace them.
