SCHUNK ROTA TB 500-205 User Manual

Translation of Original Operating Manual
Pneumatic power chuck
ROTA TB-TBS-EP
Assembly and Operating Manual
Superior Clamping and Gripping

SCHUNK ROTA TB 500-205 Specifications

General

Brand	SCHUNK
Model	ROTA TB 500-205
Category	Power Tool Accessories
Language	English

Summary

Basic safety instructions

2.1 Intended use

Defines the proper application of the chuck on machine tools and technical facilities.

2.2 Not intended use

Outlines prohibited uses, such as for load handling or exceeding technical data.

2.3 Notes on particular risks

Details specific dangers from improper use, installation, or maintenance.

2.4 Notes on safe operation

Provides general guidelines for safe operational practices and functional checks.

2.5 Personnel qualification

Specifies requirements for qualified specialists for assembly, operation, and repair.

2.7 Using personal protective equipment

Technical Data

6.2 Clamping force / speed diagrams

6.3 Calculations for clamping force and speed

Mounting

7.2.1 Mounting with bracket

7.2.2 Mounting with 2-part clamping ring (D.R.M.B.)

7.3.1 All TB 400 – 850, TB-LH 400 – 850, TB/TB-LH 1000 (2010 or later*)

7.3.2 All TB/TB-LH 1000 (up to 2009*) and EP/EP-LH

Function

8.1 Principle of Operation

8.4 Clamping or jaw actuation

Commissioning and maintenance

9.1 Commissioning

9.2 Maintenance

9.3 Maintenance intervals

Disassembly and assembly

10.1.1 Disassembly

Step-by-step instructions for disassembling chucks from 2010 onwards.

10.1.2 Assembly

Step-by-step instructions for assembling chucks from 2010 onwards.

10.2.1 Disassembly

Step-by-step instructions for disassembling chucks up to 2009 and EP/EP-LH models.

10.2.2 Assembly

Step-by-step instructions for assembling chucks up to 2009 and EP/EP-LH models.

Control of types TB / TB-LH / EP / EP-LH

Power Chuck with extended and standard jaw stroke (LH)

Assembly drawings