Need help?Do you have a question about the Schwaiger RW 100 and is the answer not in the manual?
General| Wireless Speed | Up to 300Mbps |
|---|---|
| Frequency Band | 2.4 GHz |
| Wireless Standards | IEEE 802.11b/g/n |
| Ethernet Ports | 4 |
| WAN Ports | 1 |
| Antennas | 2 |
| Security | WPA, WPA2 |
Lists key features like IEEE 802.11b/g/n compliance, multiple modes, QoS, compact design, WEP/WPA/WPA2 support, and power specs.
You can reset your WiFi Router to default setting by pressing and holding the 'RESET' button for 8-10 seconds.
Enter http://192.168.10.1 in the browser's address box to access the router's web interface.
Use default login credentials "admin" for User Name and Password to access the router.
Critical warning against interrupting the firmware upgrade process to avoid device failure.
Steps for connecting wireless devices using the WPS button.
Steps for connecting a computer to the router using an RJ45 cable.
Detailed steps for setting IP address, subnet mask, and default gateway on the computer.
To Next Page