Short Manual “Calibration” 3.7.01
General Information
Version 3.7.0 / 2019-06-26 Page 4 of 8
1.2 Symbols for Warnings, Precautionary Measures and Notes
The following conventions are used in this manual:
IMPORTANT NOTE
This symbol provides the user with useful or additional information.
CAUTION!
The symbol informs the user that particular care is required for safe and efficient
operation of the system.
1.3 Notes on the Short Manual, Purpose and Scope
This Short Manual contains the procedure of the Calibration for the SCHWIND SIRIUS.
The purpose of the user manual is to familiarize operator(s) of the SCHWIND SIRIUS with the topic
mentioned above.
This document addresses users, operators, clinic’s technical servicing people.
IMPORTANT NOTE
This SHORT MANUAL does not contain all information which is necessary for safe
and effective operation and application of the SCHWIND SIRIUS according to its
intended use.
Refer to the related SIRIUS documents as listed in the SCHWIND Short Manual
“PERAMIS-SIRIUS Measurement Evaluation” and in the SCHWIND User Manual
“WORKSTATION”.
Do not use the SCHWIND SIRIUS before reading the documents listed in the
SCHWIND Short Manual “PERAMIS-SIRIUS Measurement Evaluation”! Follow all
instructions and notes, which cover the regulatory requirements.
Keep the Short Manual and all related documents close to the medical device(s).
Always allow any user access to this user manual at all times, store it readily
available.
IMPORTANT NOTE
The present manual contains the ORIGINAL INSTRUCTIONS, which are legally
binding.
Translations of these must bear the words “Translation of the Original
Instructions”.
1.4 Intended Use of the SCHWIND SIRIUS
Refer to the CSO manual “Instructions for Use and Maintenance”.
To Next Page
Loading...
