1
Schwinn™ 810 / 510T machine
Service Manual
8023613.121519.B
Service Manual
Table of Contents
8023614.121519.B
Nautilus, Inc., www.NautilusInc.com, 5415 Centerpoint Parkway, Groveport, OH 43125 U.S.A. - Customer Service: North America (800) 605-3369, csnls@nautilus.com | outside U.S. www.nautilusinternational.com | Printed in
China | © 2019 Nautilus, Inc. | Schwinn and the Schwinn logo are trademarks owned or licensed by Nautilus, Inc., registered or otherwise protected by common law in the United States and other nations. |
ORIGINAL DOCU-
MENT - ENGLISH VERSION ONLY
1 Important Safety Instructions 2
1 Safety Warning Labels and Serial Number 3
1 Specications 4
1 Grounding Instructions 5
1 Emergency Stop Procedure 6
1 Moving and Storing the Machine 7
1 Unfolding the Machine 9
1 Leveling the Machine 10
1 Treadmill Belt (break in period) 10
1 Connectivity 11
1 Maintenance 12
1 Cleaning 12
1 Adjusting the Belt Tension 13
1 Aligning the Walking Belt 13
1 Lubricating the Walking Belt 13
1 Maintenance Parts 15
1 Troubleshooting 17
1 Engineering Mode 28
1 Electrical Wiring Diagram 29
1 Replacement Procedure Skill Level 30
Mechanical/ModicationProcedures
2 Adjust the Walking Belt 31
Part Replacement
3 Replace the Bottom Motor Cover 33
4 Replace the Console Assembly 38
5 Replace the Deck Suspension 41
6 Replace the Deck Wheel 44
7 Replace the Drive Belt 48
8 Replace the Front Roller 56
9 Replace the Incline Motor Assembly 64
10 Replace the I/O Cable 70
11 Replace the Lift Shock 76
12 Replace the Motor 80
13 Replace the Motor Control Board (MCB) 89
14 Replace the Motor Cover 94
15 Replace the Power Inlet 97
16 Replace the Rear Roller 102
17 Replace the Rear Roller Cover 106
18 Replace the Right Upright 109
19 Replace the Rocker Switch (On/Off) 115
20 Replace the Side Rail 120
21 Replace the Speed Sensor Assembly 124
22 Replace the Transport Wheel 129
23 Replace the Walking Belt 132
24 Replace the Walking Deck 141
To Next Page
General
