Schwinn 830 - Page 8

8
SPECIFICATIONS
Before Assembly
Select the area where you are going to set up and operate your machine. For safe operation, the location must be on
a hard, level surface. Allow a workout
areaofaminimum211.3cmx384cm(
83.2”x151.2”).Besurethattheworkout
space you are utilizing has adequate
height clearance, taking into consideration
theheightoftheuserandthemaximum
incline of the machine.
Basic Assembly Tips
Follow these basic points when you as-
semble your machine:
• Read and understand the “Important
Safety Instructions” before assembly.
• Collect all the pieces necessary for each
assembly step.
• Using the recommended wrenches, turn
the bolts and nuts to the right (clock-
wise) to tighten, and the left (counterclockwise) to loosen, unless instructed otherwise.
• When attaching 2 pieces, lightly lift and look through the bolt holes to help insert the bolt through the holes.
• The assembly can require 2 people.
2.11m
( 83.2
” )
0.6m
( 24” )
2m
( 79” )
0.6m
( 24” )
3.84m ( 151.2” )
Maximum User Weight: 136 kg (300 lbs)
Total Surface Area (footprint) of equipment: 16387cm
2
Power Requirements:
Operational Voltage: 120V AC@60Hz
Operating Current: 15 A
Maximum Inclined Deck Height: 38.4cm(15.1inches)
Assembled Weight: Approx.90.7kgs(200lbs)
Sound Emission: Less than 70 db average without
load. Noise emission under load is higher than without load.
Complies with the following:
ISO 20957 Compliant
DO NOT dispose of this product as refuse. This product is to be recycled. For proper disposal of this product,
please follow the prescribed methods at an approved waste center.
146.3 cm
( 57.6” )
89.4 cm
( 35.2” )
183.3 cm
( 72.2” )