Schwinn MPower - Service Mode Options; Bike Level Type Configuration; Unit Measures Setting; Power Configuration Setup

• •
•
TaptheSTAGEorAVG/ENDbuttonuntilyouseethe“––”(exit)optionintheServiceMenu.
• •
•
PushtheBacklightbuttontogobacktoUserSetupMode.
A11
CurrentSubmenuOption
A13
CurrentServiceModeMenuOption
A12ErrorMessageA14MenuNumberIndicator
BikeLevelType
TheLoptionintheServiceModemenusetsBikeLevelType.Thebiketypereferstothewheelsizeofthebike.Thedefault
valueisL01(Bike1).
UnitMeasures(English/Metric)
TheUNoptionintheServiceModemenusetstheUnitMeasuresforweight,speedanddistancetoUN0(metric)orUN1(English
Imperial).
Power
ThePoptionintheServiceModemenusetsthePowerconfigurationto:PE0(notpowerenabled–NPE)orPE1(powerenabled–PE).
SetthevaluetoPEifthereisaPowerSensoronthebike.ThedefaultvalueisNPE.
PowerCalibration
ThepowercalibrationoptionsintheServiceModemenuareonlyforbikesthathavethePowerSensorupgradeinstalled.
GototheC--optionintheServiceModemenutodocalibrationsofthePowerSensor:C01(TiltSensor)andC04(Functionality
Test).TheC02andC03menuoptionsarenotavailable.
14 14
14