CC-SMART-4K Manual
Note:
1) When user left-clicks Display/Hide button on the Measurement Toolbar, the Measurement Toolbar will be fixed. In this case
the Camera Control Panel will not pop up automatically even if moving mouse cursor to the left side of the video window.
Only when users left click the button on the Measurement Toolbar to exit from the measurement mode will they be
able to doing other operations in the Camera Control Panel, the Auto Focus Control Panel or the Camera Control Toolbar.
2) When a specific measuring object is selected during the measuring process, the Object Location & Attributes Control Bar
will appear for changing the object location and properties of the selected objects.
3) To ensure accuracy of the measurement, please click the Conjugate Correction button to reset the camera
sensor to the standard C-mount position before calibration. The measurements can be started after calibration is
completed and the video is focused.
4) In case calibration is completed but camera sensor is not on the C-mount position, The Conjugate Correction should
be done to reset sensor to the standard C-mount position and the video is focused before measurement is started.
To Previous Page
Loading...