Need help?Do you have a question about the Scientific Atlanta PowerVu D9850 and is the answer not in the manual?
Guides the user through the initial setup process for the receiver, including filling out key information.
Details on editing default PSI settings to configure for Free-to-Air service.
Instructions for navigating the Preset/Input menu to edit active presets.
Specific parameters for C-Band setup, including frequency and satellite selection.
Guidance on setting LNB power to Off or LO1 when not powering the LNB.
Steps to achieve signal lock and acquire network information for successful operation.
Information on handling 'Not Authorized' messages and finding decoder address.
General| Power Supply | 100-240 VAC, 50/60 Hz |
|---|---|
| Demodulation | QPSK, 8PSK |
| Input Frequency Range | 950-2150 MHz |
| Input Level Range | -65 to -25 dBm |
| Modulation | QPSK, 8PSK |
| Input Interfaces | L-Band |
| Output Interfaces | Composite |
| Resolution Support | 480i, 576i |
| Output Ports | ASI |
| Conditional Access | PowerVu |
| Data Ports | Ethernet, RS-232 |
| Symbol Rate | 45 Msps |
| Operating Temperature | 0°C |
To Next Page
