SCIFIT ISO1000 User Manual (English)

To Next Page

ISO7000 Battery Replacement

1. Remove both side covers, using a Philips screwdriver.

2. Pull the seat plunger (P2589) and remove seat post (A1692) from the unit.

3. Remove the four (4) rear frame bolts (shown below), using a ½” socket.

There are two (2) on each side of the frame. Each bolt also has a lock

washer on it.

4. Remove the two (2) front frame bolts (shown above), using a ½” socket.

There is one (1) on each side of the frame. Each bolt also has a lock

washer on it. Do not remove the front frame / pivot bolts.

Other manuals for SCIFIT ISO1000

Need help?

Do you have a question about the SCIFIT ISO1000 and is the answer not in the manual?

General