Need help?Do you have a question about the SCM SCR331-DI and is the answer not in the manual?
Lists key features of the SCR331-DI reader, including interface standards, compliance, and operational capabilities.
Details hardware aspects like power supply, LED indicators, clock frequencies, and smart card slot specifications.
Outlines software requirements, supported OS, and key ICC/PICC parameters and compliance.
Describes the device firmware, its USB interface support, and dual slot architecture implementation.
Details single and dual driver packages for the reader and their operational characteristics.
Details current implementation supporting dual slots for card interfaces.
Specifies the supported voltage for the USB interface as 5.0 Volts.
Lists supported ICC protocols (T=0, T=1) and PICC protocol (T=1).
States the default ICC clock frequency is 4 MHz, without manual selection.
Specifies default ICC I/O data rate (9600 bps) and maximum supported rate (250 Kbps).
Indicates no support is provided for synchronous communication protocols.
Lists supported CCID class specific requests, with 'Abort' being the only one implemented.
General| Device Type | Smart Card Reader |
|---|---|
| Interface | USB |
| Protocols | T=0, T=1 |
| Operating System Support | Windows, Linux, Mac OS |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | -20°C to 70°C |
| Supported Smart Cards | ISO 7816 |
| Compliance | ISO 7816 |
| Power Supply | USB Bus Powered |
To Next Page