EasyManua.ls Logo

Scooty Kick - Folding and Unfolding the Device; Preparation for Use

Scooty Kick
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
9
4� Disconnect the end connected to the device and replace the cap�
Verify the charge level prior to each use with the battery level sound
indicator. This sound indicator will be activated when you start the device.
Sound indicator Level of battery charge
1 beep Over 75%
2 beep Over 50%
3 beep Over 10%
Continuous beep Lower than 10%
Notice: We recommend you fully recharge the battery after each use and at least
once a month.
4.2 FOLDING/UNFOLDING THE DEVICE
The scooter can be folded and unfolded easily thanks to the locking lever(5).
Unfolding
1� Place the scooter horizontally in front of you�
2� Lift the lever (12).
3� Unlock the scooter by pressing the lever (5).
4� Lift the scooter frame by about 90 degrees until you hear a soft click�
5� Close the lever (12).
6� The process is complete�
Folding
1� Place the scooter horizontally in front of you�
2� Lift the lever (12).
3� Unlock the scooter by pushing the vertical tube forward and pressing
the lever (5)
4� Lower the scooter frame by about 90 degrees until you hear a soft click.
5� Close the lever (12).
6� The process is complete�
4.3 PREPARATION
It is essential to learn to use the scooter under comfortable conditions:
Wear a helmet and appropriate protection equipment (knee pads, elbow
pads and wrist guards....).

Related product manuals