Scooway T8 - Scooway T8 Troubleshooting Guide; Common Issues and Solutions

16
13.Troubleshooting
Tests to be carried out
• After a fall, check that the accelerator lever works properly. To do this,
accelerate and
decelerate several times.
• Check from time to time that the brakes are working properly. To do this, move
the
vehicle. Push it manually and suddenly brake to make sure it responds to
commands.
• Check that all vehicle components are in place and securely fastened.
• Check tyre wear and pressure.
• Check the wear of the brakes and cables.
Error 1
The motor is not running but the display board is working.
Cause
1. The battery is not connected .
2. The battery is dead.
3. Electrical Problem
4. The break handle is damaged.
5. The motor damaged
Solution
1. Check the connectors.
2. Charge the battery to 100%.
3. Request technical assistance from your dealer .
4. Replace the break handle.
5. Replace a motor.
Error 2
The rear wheel will not turn
Cause
Brake problem
Solution
Ajust the brakes
Error 3
The vehicle stops suddenly while it is running