Scooway T8 - Scooway T8 Operation Guide; Basic Scooter Operations; Advanced Control Functions

6
NO.
Function
Operation Method
1
Turn on/off
Press the power button 3 SECONDS
2
Change the total mileage and
single mileage
Press the power button ONCE
3
Change Mode
Press the light button ONCE to select the
mode.
Gear 1 : Pedestrian mode ( up to 6km/h) ;
Gear 2 : Comfort Mode
（
up to 20km/h);
Gear 3: Sport Mode (up to 25km/h)
4
Turn on/off the headlight
Press the light button TWICE.
5
Change the kilometer and miles
Press the light button 3 TIMES.
6
Take out the battery pack
Hold down the brake, press the light button 3
TIMES, then click the power button 2 TIMES.
7
Cruise Control
Press the accelerator.It is activated after the
same speed has been maintained for about
12 ~15 seconds.
Any operation will automatically exit this
function.
8
Brake
Press the brake when you need to decelerate
and stop.
9
Accelerator
Press the accelerator when you need to start
or accelerate.
10
Coded Lock
Press the button, pull out the wire.