S
Shelley GuerreroAug 8, 2025
What to do if my SCOPREGA BRAVO 20 unit will not start?
- AallenbeckAug 8, 2025
If your SCOPREGA Power Tool won't start, first ensure the battery isn't low. Recharge it using the 110-240 Vac battery charger or connect it to an external battery using alligator clips. Also, verify the ON push button is engaged. Check the safety fuse and replace it with a 30A fuse if it's blown. If none of these steps work, the unit may be damaged, and you should seek assistance from a BRAVO Service Center.