To Next PageTo Next PageHow to fix a SCOPREGA Battery Charger that won't start?
If your SCOPREGA Battery Charger inflator won't start, first ensure the cable is properly connected. If you are using a BST 800 BATTERY model, verify that the battery is charged. Also, make sure the device is switched ON. If the cable is damaged, the inflator should be repaired at a BRAVO Service Centre.
What to do if my SCOPREGA Battery Charger will not inflate/deflate?
If your SCOPREGA Battery Charger is not inflating or deflating, check that the tube is connected to the correct port and ensure that the device is switched ON.
General| Brand | SCOPREGA |
|---|---|
| Model | BRAVO BST Series |
| Category | Battery Charger |
| Language | English |
Read these instructions carefully before using the inflator to avoid product damage or personal injury.
Covers reading, keeping, following instructions, ventilation, cord protection, and avoiding disassembly.
Emphasizes reading and following all instructions to prevent product damage and serious harm.
Covers work area, unintentional starting, alertness, damaged parts, flammable atmospheres, and breathing risk.
Explains the two-stage inflation process for BST 300, BST 800, and BST 800 BATTERY models.
Details voltage, current, pressure, and flow rate for BST 300, BST 800, and BST 800 BATTERY.
Instructions for disconnecting and reconnecting the battery for initial use.
Guidance on optimal charging temperatures, normal heat, and charger safety precautions.
Steps for connecting the inflator, hose, setting pressure, and automatic stop.
Instructions for connecting the hose for deflation and safety precautions.
Guidance on how to clean the inflator unit.
