CODICO
®
E-1710&1720
Compact DSNG Encoders
Scopus Documents (p/n 100401) Page iii
MANUAL SCOPE AND STRUCTURE
The User Manual for the CODICO
E-1710/1720 Compact DSNG Encoders provides
instructions for qualified installation, service and operation technicians to facilitate
optimum performance of the E-1710/1720 in a Digital Video Broadcasting System.
The manual is comprised of four main chapters:
1. OVERVIEW:
This chapter provides introduction and product description, including
highlights, benefits and typical applications, gives a functional and physical
description of the unit and lists its main capabilities and specifications.
2. INSTALLATION:
This chapter provides data and procedures required to install and activate the
unit. Procedures include site preparation and requirements, installation in a
19" rack, cable connections, panel options and Pin-out descriptions, initial
settings and serviceability check.
3. FRONT PANEL OPERATION:
This chapter provides theoretical background on the operation of the unit,
and gives data and instructions on using the unit and operating the control
and monitoring functions provided to the user from the E-1710/1720 Front
Panel.
4. CONFIGURATION FILES:
This chapter provides information about the E-1710/1720 configuration
through the configuration file “config.cfg”.
It is assumed throughout this document that personnel have a general knowledge
about the CODICO
®
E-1710/1720 Compact DSNG Encoders, application and
capabilities.
General knowledge of the CODICO
®
System and its application is also assumed. For
detailed information, refer to the CODICO
®
MPEG-2 DVB Family Product Description
documents.
T
ECHNICAL
S
UPPORT
In case of technical problems with the CODICO
system or one of its components
please refer to the System Documentation. In most instances, this may save you
time in resolving technical difficulties.
Should you not be able to resolve the problem please call your local distributor for
technical support.
To Next Page
Loading...
