Need help?Do you have a question about the Scorpa SY-250FR 2008 and is the answer not in the manual?
Information on safe riding practices, protective gear, and adherence to laws.
Details essential checks for fuel, oil, brakes, and throttle before riding.
Covers checks for clutch, chain tension, lubrication, and tires.
Step-by-step guide for starting the engine when cold, including choke usage.
Instructions for engine break-in and advice on safe parking.
Lists required tools and provides a schedule for lubrication and maintenance.
Details checks and maintenance for fuel hoses, spark plugs, and valves.
Covers maintenance for camshafts, timing chain, pistons, and rings.
Details maintenance for air filter, clutch, transmission, and brakes.
Guides on checking spark plug condition, color, and electrode gap.
Procedure for checking engine oil level and changing oil and filter.
Detailed steps for cleaning and maintaining the air filter element.
Guidance on adjusting the carburetor for optimal engine performance.
Explains valve clearance changes and recommends dealer adjustment.
Guidelines for checking tire pressure, condition, and tread depth.
Covers chain tension check, setting, and lubrication procedures.
Procedure for adjusting brake lever and pedal play.
Checking brake pad wear and fluid level.
Checks for fork condition, oil leaks, and adjustment of compression/rebound.
Checks for spring condition, shock absorber, and adjustment of pre-load/rebound.
Inspecting front fork, steering bearings for damage and functionality.
Diagnostic flow charts for fuel and compression issues.
Diagnostic flow charts for ignition and compression problems.
Lists model name, dimensions, engine type, displacement, and oil.
Details fuel, carburetor, spark plug, and tire specifications.
Covers transmission, chassis, wheel, and brake system specifications.
Procedure for removing the cylinder head cover and camshafts.
Measuring camshaft lobes, runout, and clearance.
Steps for installing camshafts, aligning marks, and checking clearance.
Details cylinder head removal, cleaning carbon deposits, and checking warpage.
Installing cylinder head, bolts, pipes, and cover gasket.
Details valve removal, stem-to-guide clearance, and face inspection.
Measuring valve margin/width and performing valve lapping.
Procedure for checking and adjusting valve clearance.
Details cylinder/piston removal, bore measurement, and clearance checks.
Measuring piston ring side clearance and end gap.
Detailed steps for changing the oil in the front forks.
General| Year | 2008 |
|---|---|
| Manufacturer | Scorpa |
| Model | SY-250FR |
| Category | Motorcycle |
| Displacement | 249 cc |
| Cooling System | Liquid-cooled |
| Transmission | 5-speed |
| Front Suspension | Telescopic fork |
| Rear Suspension | Monoshock |
| Front Brake | Disc |
| Rear Brake | Disc |
| Engine Type | 2-stroke |
| Bore x Stroke | 72.8 x 60 mm |
To Next Page