To Next PageTo Next Page
Need help?Do you have a question about the Scosche HANDLEIT HFBM01 and is the answer not in the manual?
General| Product Name | Scosche HANDLEIT HFBM01 |
|---|---|
| Category | Bicycle Accessories |
| Mounting | Handlebar |
| Mount Type | Clamp |
| Adjustability | Yes |
| Color | Black |
| Compatibility | Smartphones |
| Material | Plastic |
| Handlebar Diameter Range | 0.875" to 1.25" (22.2 mm to 31.8 mm) |
Instructions on contacting Scosche for assistance or replacement parts instead of returning to the retailer.
Align and insert the 3-prong adapter plate into the handlebar clamp and secure it.
Attach the mounting clamp to the handlebars, tighten the thumbscrew, and use the spacer if needed.
Press the button and slide the case to release the holder and adapter plate.
Wrap the included rubber bands over the phone and mount for added security.
Slide the plate toward the bottom of the holder to release it.
Insert the 3-prong plate into the handlebar mount from left to right.
Details the 1-year warranty against defects in material and workmanship from purchase date.
Specifies warranty terms for Australian sales, including rights under the Australian Consumer Law.
