Scosche MQUSM - MagicMount Plate Installation; Mounting Option 1 (Direct to Device); Mounting Option 2 (Via Case); Removing the Metal Plate

•
~
•
~
•
•
MAGICPLATE
™
MOUNTING OPTION 1
NOTE: For mounting directly to device, use the large single plate with template guide as
shown in the instructions below.
1
2
Line up the
the white
Remove
corresponding
paper backing
arrows on the
from both plates
Template Guide to the
to the bottom of your
phone.
REMOVING THE PLATE
Use a thin plastic card to carefully lift the
3
plate’s adhesive surface from the mounting
surface. Slowly lift up and remove the plate.
When
Do not use any heat or liquids to
positioned, press
remove the plate, due to risk of
plates firmly to
damaging your phone. Contact Scosche
affix and
Customer Service for any additional
remove
assistance at 800.363.4490 Ext. 1 or
template.
customerservice@scosche.com
MAGICPLATE
™
MOUNTING OPTION 2
NOTE: For mounting directly to CASE, use the (2) small plates with the integrated
template guide as shown below.
1 2
Line up the
the white
Remove
corresponding
paper backing
arrows on the
from both plates
Template Guide to the
to the bottom of your
phone.
3
4
Lastley,
positioned,
When
remove the
press plates
template guide.
firmly to affix.
REMOVING THE METAL PLATE
Use a thin plastic card to carefully lift the plate’s adhesive
surface from the mounting surface. Slowly lift up and remove
the plate. Do not use any heat or liquids to remove the plate, due to risk of
damaging your phone. Contact Scosche Customer Service for any additional
assistance at 800.363.4490 Ext. 1 or customerservice@scosche.com
2