7. Pick an installation area on your windshield.
We
recommend
placing the dash cam behind the rear-view mirror and checking
the camera view in the Nexar app.
DO
NOT
MOUNT
CAMERA
in
a location that will obstruct the driver's
view.
It is the user's responsibility
to
mount the device
in
compliance will all
applicable laws and ordinances.
Thoroughly clean windshield where the unit will be mounted.
Detach as many adhesive hooks as
necessary for your mounting
preference
(A).
Next, route the power
cable through the used hooks leading
to
the camera for a clean guided cable
route
{B).
The detached cable hooks
can also be reused for routing cable
elsewhere
in
the vehicle.
Remove adhesive protection film, then
firmly apply the mount
to
the
windshield
{C)
and press on adhesive
mount
to
secure the camera assembly
onto location.
To Next Page
Loading...