4. Connect the other end of the charging cable
to
the USB charger
and plug the charger into your car's power socket.
Note: If your dash camera came with a hard-wiring kit, or you
have purchased one separately, please refer
to
the instructions
that came with the hard-wiring kit.
Note: Mount and position camera onto windshield before
connecting and routing
to
power source, see instruction for
more information.
5.
Start the car to power on the camera. The camera will power on
when the vehicle
is
on, and power off when the vehicle is off.
6. Follow the instructions in the app to pair your phone with the
dash- cam.
Tip: Shared car?
Make sure all drivers download the
Nexar app and pair it
with
the dash cam.
To Next Page
Loading...