USING
THE
ARMBAND
MONITOR
FIGURE 3
Wear
armband
on
the
upper
portion
of
the
forearm. Sensor should be on
the
inside
or
top
of
forearm.
It
should be
worn
snug enough
not
to
move
on
your
arm,
but
-NOT
so
tight
that
it
restricts
arm
circulation (Figure 3).
Initial
Setup
with
Bluetooth
Smart
Fitness
Apps
1.
Set 8/uetooth on the device
to
ON.
2.
Find the Sensor Settings menu
in
the 8/uetooth Smart Fitness App.
3.
Connect the
RHYTHM+
armband by turning it on.
Initial
Setup
with
Bluetooth
Smart
devices
(Sports
Watches
& Fitness Equipment)
1.
From the device settings menu select "Add HR sensor"
2.
Connect the
RHYTHM+
armband by turning it on.
Initial
Setup
with
ANT+
devices
(Sports Watches & Fitness Equipment)
Turn on the armband and move within range of your display device.
Note:
Heart Rate Monitoring will work with most Bluetooth Smart Fitness Apps.
For a list
of
compatible Apps, please visit
www.scosche.com.
LED
Indicators
(Biuetooth
Smart
Operation)
1 . Alternating RED/BLUE - the armband
is
waiting for a connection.
a)
Armband will only power down if removed from the forearm for more than
5 minutes.
2.
Three
(3)
BLUE
blinks-
the armband has connected successfully.
3.
Slow PURPLE
blink-
the HR monitor is on and in normal operation.
LED
Indicators
(ANT+ Mode)
1.
RED
blink-
the
HR
monitor
is
on and
in
normal operation.
3
To Next Page
Loading...
