Scosche RHYTHM+ 2.0 - User Manual

To Next Page

USER MANUAL

RHYTHM 2.0

PERFORMANCE HEART RATE

MONITOR & BIOMETRIC SENSOR

!!WARNING!!

This is not a medical device and is

intended for training and recreational use

only. Consult a physician prior to use to

determine appropriate heart rate zones.

NOTICE:

The RHYTHM+ 2.0 Heart

Rate Monitor is waterproof to IEC Standard

60529 IP67.It can withstand immersion in 1

meter of water for 30 minutes. Prolonged

submersion can cause damage to the unit.

This product is ANT+ certified and is

compatible with ANT+ displays that

support the following data:

Visit www.thisisant.com/directory

For the very latest documents go to scosche.com/rhythm20

including Bluetooth Smart help, recommended apps,

compatible devices, and troubleshooting.

your product

online at

www.scosche.com/register

About Valencell

Valencell Precision Biometrics is a patent-protected sensor

technology which continuously measures real-time biometric

data with a high degree of accuracy and consistency, and

uses this data to give people meaningful tness assessments.

It seamlessly integrates into audio earbuds and other wearable

devices, such as armbands and wristbands, and can connect

with smartphone apps people are already using while exercising.

Valencell sensor technology allows you to capture accurate data

such as heart rate, distance, speed, cadence, calories burned and

max (aerobic fitness level).

Patent: www.valencell.com/patents

RTHM2.0

Need help?

Do you have a question about the Scosche RHYTHM+ 2.0 and is the answer not in the manual?

Summary

Getting Started

Multifunction Button (MFB)

Controls device power and functions via press and hold actions.

Charging the Device

Instructions for charging the RHYTHM+ 2.0 unit via USB charging base.

Using the Armband Monitor

Band Placement

Proper positioning of the armband on the arm for accurate readings.

Initial Setup and Connectivity

Guides for connecting with Bluetooth Smart and ANT+ devices.

LED Indicators

Explains LED light signals for Bluetooth and ANT+ operation modes.

Care Instructions

Cleaning Guidelines

How to clean the sensor lens, housing, and charging contacts.

Disclaimers and Support

Important Disclaimers

Advises medical consultation for certain conditions and limits liability.

Customer Support and Warranty

Contact information for assistance, replacement parts, and warranty details.

Summary

Getting Started

Multifunction Button (MFB)

Controls device power and functions via press and hold actions.

Charging the Device

Instructions for charging the RHYTHM+ 2.0 unit via USB charging base.

Using the Armband Monitor

Band Placement

Proper positioning of the armband on the arm for accurate readings.

Initial Setup and Connectivity

Guides for connecting with Bluetooth Smart and ANT+ devices.

LED Indicators

Explains LED light signals for Bluetooth and ANT+ operation modes.

Care Instructions

Cleaning Guidelines

How to clean the sensor lens, housing, and charging contacts.

Disclaimers and Support

Important Disclaimers

Advises medical consultation for certain conditions and limits liability.

Customer Support and Warranty

Contact information for assistance, replacement parts, and warranty details.

The Scosche RHYTHM+ 2.0 is a performance heart rate monitor and biometric sensor, designed for training and recreational use. It is not a medical device.

Function Description:

The RHYTHM+ 2.0 continuously measures real-time biometric data with high accuracy and consistency. This data is used to provide meaningful fitness assessments. It can capture accurate data such as heart rate, distance, speed, cadence, calories burned, and VO2 max (aerobic fitness level). The device seamlessly integrates into wearable devices like armbands and wristbands and connects with smartphone apps. It is ANT+ certified and compatible with ANT+ displays that support heart rate data. It also supports Bluetooth Smart for connection with fitness apps and devices.

Important Technical Specifications:

Waterproof Rating: IEC Standard 60529 IP67. It can withstand immersion in 1 meter of water for 30 minutes. Prolonged submersion can cause damage.
Battery Life/Charging: Approximately 2 hours for a full charge. A red flashing LED indicates charging, and a solid blue light indicates a full charge.
Connectivity: Bluetooth Smart and ANT+.
Data Supported (ANT+): Heart Rate (HR).
Sensor Technology: Valencell Precision Biometrics, a patent-protected sensor technology.

Usage Features:

Turning On/Off: Press and hold the multifunction button (MFB) for 2 seconds to turn on, and 3 seconds to turn off.
Charging:
1. Attach the charging base to the RHYTHM+ 2.0 unit.
2. Connect the USB to a wall charger or computer.
3. A red flashing LED indicates charging.
4. Remove the charging base after charging.
Band Placement: For the most accurate readings, wear the RHYTHM+ 2.0 on the upper forearm, biceps, or triceps. The band should be snug enough not to move on your arm, but not so tight as to restrict circulation. The upper forearm is the recommended placement.
Initial Setup with Bluetooth Smart Fitness Apps:
1. Set Bluetooth on the device to ON.
2. Find the Sensor Settings menu in the Bluetooth Smart Fitness App.
3. Connect the RHYTHM+ 2.0 armband by turning it on.
Initial Setup with Bluetooth Smart Devices (Sports Watches & Fitness Equipment):
1. From the device settings menu, select "Add HR sensor."
2. Connect the RHYTHM+ 2.0 armband by turning it on.
Initial Setup with ANT+ Devices (Sports Watches & Fitness Equipment):
- Turn on the armband and move within range of your display device.
LED Indicators (Bluetooth Smart Operation):
- Alternating RED/BLUE: The armband is waiting for a connection.
- Three (3) BLUE blinks: The armband has connected successfully.
- Slow blink: The HR monitor is on and in normal operation.
LED Indicators (ANT+ Mode):
- Slow blink: The HR monitor is on and in normal operation.
Health Considerations: Consult a physician prior to use to determine appropriate heart rate zones. Do not use if you have a medical or heart condition, are taking photosensitive medication, have epilepsy or are sensitive to flashing lights, have reduced circulation or bruise easily, or have a musculoskeletal disorder. If you experience a medical emergency, stop using the product and consult a medical professional immediately. Prolonged contact with wearable devices may contribute to skin irritation or allergies in some users. If skin irritation occurs, remove the device. If symptoms persist longer than 2-3 days, consult a doctor.

Maintenance Features:

Sensor Lens Cleaning: Clean the sensor lens with a soft cloth to ensure accurate readings.
Armband, Sensors, and Plastic Housing Cleaning: Use a soft cloth with ONLY mild hand soap and cool water to wipe down these components.
Charging Contacts Cleaning: Use a cotton swab and ONLY rubbing alcohol to clean the charging contacts.
Prohibited Cleaning Agents: Do not use any abrasive chemicals to clean the RHYTHM+ 2.0 Armband, sensors, or plastic housing, as this will cause permanent damage.
Wear and Care Tips to Reduce Irritation:
1. Keep the device clean.
2. Keep the device dry.
3. Do not wear it too tight.

Warranty and Support:

For complete warranty details, visit www.scosche.com or call (800) 363-4490. For assistance or replacement parts, call toll-free: 1-800-363-4490 X1. Support hours are Monday-Friday 8 AM-5:30 PM (PST) and Saturday 8 AM-2 PM (PST). Do not return the product to the retailer.