Intended Use•
This laminator is designed for use with
thermal laminating pouches for paper
or flat paper-like items between two film
ayers. It is intended for home, home
office or small office, and school use.
OWÄRNlN6"
Not For Use:
LAMINATING MACHINE IS NOT INTENDED FOR USE BY CHILDREN Items not intended for
use with the laminator include: currency, identification cards, thermal papers, stamps, credit
cards, cards with a magnetic strip and other similar items Also, do not use sharp objects,
heat sensitive materials, historically significant papers or one-of-a-kind items. Use in any
other application has not been evaluated by 3M and may ead to an unsafe condition
To reduce the risks associated with hazardous voltage and fire which, if not avoided, could result in serious injury or death:
• Before using the laminator, plug it into an electrical outlet that is
near the laminator and easily accessible
• Only connect laminator to a grounded 1201/ outlet
• Do not use laminator with a vo tage or outlet converter
• Do not operate laminator if it has a damaged power cord or plug,
if it is not working properly, or if it has been dropped or damaged
• Keep power cord away from hot surfaces
! WARNIN
• Do not use laminator in wet environments. The laminator is
intended for indoor use on y.
• Unplug the laminator from electrical outlet before storage or
when not in use.
• Do not pul on the cord to unplug the laminator. Unplug the
power cord by pulling straight out on the plug
• Do not remove the outer housing or attempt to service or repair the
machine yourself The laminator contains no user serviceable parts
To reduce the risks associated with fire and hot surfaces which, if not avoided, could result in serious injury or death:
• Do not p ace laminating film or any items on top of aminator.
To reduce the risks associated with hot surfaces which, if not avoided, could result in minor or moderate injury:
• Laminator is not intended for use by chi dren
• Place unit on a flat, secure, hard, stable surface
• Do not cover the vent holes on the bottom or sides of the
aminator while the power is on
CAUTIO
• The laminator and laminated items become hot during use
• Allow laminated items to cool before handling
• Do not leave the laminator unattended while turned on or in use
• Unplug the laminator from electrical outlet before storage or when not in use.
• Allow the laminator to cool before moving or storing
To reduce the risks associated with environmental contamination:
• Dispose of electronic waste in accordance With applicable local and government regu ations
NOTICE)
To prevent damage to the device and laminated items:
• Use laminator only as stated in the intended use statement.
• This product is designed and intended to be used in the US and Canada only. Use outside the US and Canada has not been evaluated by 3M
Product may not meet regulatory requirements outside of US and Canada
Explanation of Signal Word Consequences:
WARNING: Indicates a hazardous situation which, if not avoided, could result in serious injury or death
CAUTION: Indicates a hazardous situation which, if not avoided, could result in a minor or moderate injury or property damage
NOTICE: Indicates a situation which, if not avoided, could result in property damage
FCC'
Supplier's Declaration of Conformity for the following 3M Company manufactured product(s):
Trade Name: ScotchTM Thermal Laminator
Model(s): TL901X
We hereby declare that this product(s) complies with Part 15of the FCC Rules. Operation is subject to the following two conditions:
1.This device may not cause harmful interference, and
2 This device must accept any interference received, including interference that may cause undesired operation
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
Interference to radio or television reception, which can be determined by turning the equipment off and on, the user ISencouraged to try to correct
the interference by one or more of the fol owing measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
• Consult the dealer or an experienced radio/ TV technician for help
Modifications to this device shall not be made without the written consent of 3M Company
Unauthorized modifications may void the authority granted under Federal Communication Rules permitting the operation of this device
Responsible Party - US Contact information:
3M, Stationery and Office Supplies Division
3M Center, St Paul, MN 55144-1000
Phone: 1-800-328-6276
nternet contact information: www scotchbrand.com
are and Maintenance•
• Unplug the laminator and wait for it to cool down before cleaning. Wipe the exterior with a dry cloth to remove dust. Do not use solvents
or detergents
• DO NOT DROP machine or otherwise subject it to impact.
• Store laminator in a cool, dry location
WARNING: To reduce the risks associated with hazardous voltage and fire which, if not avoided, could result in serious injury or death:
• Unplug the aminator from electrical outlet before storage or when not in use.
• Do not remove the outer housing or attempt to service or repair the machine yourself The laminator contains no user serviceable parts
To Next Page
Loading...