To Next PageTo Next Page
Need help?Do you have a question about the Scotsman AC-EC 127 and is the answer not in the manual?
Provides guidance on making electrical connections, including voltage requirements and safety precautions.
A comprehensive list of checks to ensure proper installation before operating the ice maker.
Highlights critical operating temperature limits for the ice maker to prevent malfunction or damage.
Step-by-step guide for initiating the ice maker's operation after installation, including water filling.
Guidance on performing initial checks during the start-up phase, monitoring water filling and components.
Explains conditions that trigger unit shut-off, such as high temperature, and the necessary restart procedure.
Overview of the P.C. Board's functions, components, and diagnostic LEDs.
Guides on adjusting DIP SWITCH settings to modify ice cube size based on indentation.
Troubleshooting steps for unit not running or only green LED illuminated.
Diagnosing issues related to bin full indicators and red alarm lights.
Troubleshooting intermittent compressor cycling due to low voltage or system issues.
Diagnosing water shortage issues and problems causing irregular ice cube shapes.
Troubleshooting oversized ice cubes and reduced ice production capacity.
Identifying causes and solutions for poor harvest, including water flow restrictions.
Troubleshooting unit not harvesting and issues related to incorrect discharge pressure.
Diagnosing and resolving excessive water in the unit base, likely due to tubing leaks.
Instructions for removing, cleaning, and replacing the air condenser filter.
Instructions for draining the system and preparing the cleaning solution.
General
