Scott Safety PAK-ALERT User Manual

Page 1 of 28
P/N 595277-01 Rev E 10/17
THE SCOTT PAK-ALERT DISTRESS ALARM
INCLUDING THE OPTIONAL SCOTT PAK-TRACKER LOCATOR SYSTEM
INTEGRATED WITH THE SCOTT AIR-PAK
X3 & X3 PRO CGA OR SNAP-CHANGE
SELF-CONTAINED BREATHING APPARATUS (SCBA)
FIGURE 1
AIR-PAK X3 SCBA WITH PAK-TRACKER LOCATOR TRANSMITTER
SPECIALLY EQUIPPED PAK-ALERT DISTRESS ALARM ASSEMBLY
PAK-ALERT
CONTROL CONSOLE ASSEMBLY
SENSOR MODULE ASSEMBLY
WITH OPTIONAL PAK-TRACKER
LOCATOR TRANSMITTER
(RED LABELS)
OPTIONAL
PAK-TRACKER
HAND HELD
RECEIVER
© 2017 Scott Safety. SCOTT, the SCOTT SAFETY Logo, Scott Health and Safety, PAK-ALERT, AIR-PAK, X3, SNAP-
CHANGE, VIBRALERT, and PAK-TRACKER are registered and/or unregistered marks of Scott Technologies, Inc. or
its afliates.
OPERATION AND MAINTENANCE INSTRUCTIONS
DRAFT
NOT FOR DISTRIBUTION

Scott Safety PAK-ALERT Specifications

General

Brand	Scott Safety
Model	PAK-ALERT
Category	Security Sensors
Language	English

Summary

PAK-TRACKER LOCATOR SYSTEM OPERATION

USE AS PART OF AN ACCOUNTABILITY SYSTEM

PRINCIPLES OF OPERATION

RADIO FREQUENCY INTERFERENCE (RFI)

INTRINSICALLY SAFE LISTING

HAND HELD RECEIVER NON-INCENDIVE LISTING

OPERATION OF THE SCOTT PAK-ALERT DISTRESS ALARM

ALARM MODES

PRE-ALARM

Describes the conditions and indicators of the pre-alarm state.

FULL ALARM

Details the full alarm condition, sound, lights, and activation.

MANUAL ALARM

Explains how to manually activate the full alarm and its function.

TURNING OFF THE PAK-ALERT DISTRESS ALARM

BATTERY STATUS AND TESTING

LOW BATTERY

BATTERY TEST

DETECTING AND AVOIDING RADIO FREQUENCY INTERFERENCE

REGULAR OPERATIONAL INSPECTION

INSPECTION OF A PAK-ALERT DISTRESS ALARM

INSPECTION OF PAK-ALERT WITH PAK-TRACKER SYSTEM

OPERATION OF SENSOR MODULE LIGHTS

QUICK REFERENCE GUIDE TO USE

BATTERY REPLACEMENT

PAK-ALERT DISTRESS ALARM SPECIFICATIONS