Need help?Do you have a question about the SCOTT 222D and is the answer not in the manual?
Terminal strips for speaker connections on the rear are explained.
Illustrates how to make speaker wire connections.
Details on how to connect speaker wires to amplifier terminals.
Guidance for operating the amplifier with only one speaker.
Explains the use of the derived third channel for expanded audio.
Instructions for connecting the derived center channel output.
Details on the powered center channel output for driving speakers.
Explains the front panel headphone jack and its operation.
Guide for connecting magnetic cartridge record players to low level inputs.
Instructions for connecting ceramic/crystal cartridge players to high input.
How to connect a monophonic record player to the amplifier.
Connecting a stereo tape deck to the amplifier's tape head input.
How to connect stereo or mono tuners to the amplifier's tuner input.
Connecting older monophonic tuners to the amplifier.
Using the extra stereo input for other high-level sources.
Instructions for making tape recordings using amplifier outputs.
How to connect and listen to tape recordings.
Description of accessory AC outlets on the amplifier's rear.
General guidance on operating the amplifier's controls.
Steps to turn the amplifier on and activate the pilot light.
How to select the audio source for listening.
Details on equalization curves and the pickup switch for the 299 series.
Explanation of the selector switch for mode and input selection.
To Next Page
General