OWNER MANUAL
If the brake system has brake pads, you have to be
aware of the fact that the rim will be worn through the
action of braking.
When riding in wet and muddy terrain for example, the
rim is quickly worm out. SCOTT bikes that are fully
equipped (lights, mudguard, carrier) have a wear-out-
indicator.
Please refer to the enclosed instructions of the manu-
facturer.
– Front and rear derailleur for perfect function and
grease them. If necessary readjust the system
and clean it.
– The play of the headset. If necessary readjust it.
– Brake and shifting cables on perfect wear and
leakage on hydraulic systems. If necessary
grease the cables.
– chain wear and tension ( on bikes equipped with
internal gear hubs). Readjust if necessary, clean
and grease the chain.
– Bottom bracket cartridge for play, if necessary
replace it.
– Pedal bearings for play, if necessary replace them.
– front and rear derailleur for perfect function and
grease them. If necessary readjust the system and
clean it.
– stem and handlebar for visible damages and
replace them if necessary. Please make sure that
the bolts are tightened evenly when closing the
front cap, according to the tightening torque
recommended by the producer of the parts.
– Complete brake system on perfect function and
readjust and grease it if necessary. Replace worn
out or defective parts. Replace leaking hydraulic
pipelines at once .
– Rims and tension of spokes. If necessary true them.
– Air pressure of the tires according to the
recommendation of the producer.
– Overall condition of the tires
– Light systems and bell
– Handlebar grips to be fixed to the handlebar
– All parts of the rear suspension system including
mounting bolts
– The front suspension fork on perfect function and
play in the bushings.
– Frame and fork on perfect condition, replace in case
of damages
Maintenance schedule
Please be aware of the fact that you have to follow the
list of maximum tightening torques for screws at the
end of this chapter.
Please check before every ride:
– all bolts and nuts, especially the quick releases of
the wheels for proper fit and in case they are loose
tighten them according to the maximum tightening
torque.
– stem and handlebar for visible damages and
replace them if necessary. Please make sure that
the bolts are tightened evenly when closing the
front cap, according to the tightening torque
recommended by the producer of the parts.
– Braking systems
– Air pressure of the tires according to the
recommendation of the producer.
– Light systems and bell
– Handlebar grips to be fixed to the handlebar
OWNER MANUAL
16-17
Rim and wear of the rim Maintenance and Care
Please check additionally
monthly:
Please check if necessary or at
least once a year at your dealer:
– All parts of the rear suspension system including
mounting bolts
– The front suspension fork on perfect function and
play in the bushings.
To Next Page
Loading...
Need help?
General
