SCOTT BODY ARMOR - Page 6

ENGLISH - 6
MARKING
The label is stitched onto the protector
Back protector Back protector junior
Personal Protection Equipment (PPE) designed and manufactured to
provide limited protection against the risks of impact in the event of a fall
SCOTT COMMANDER BACK PROT.
Included in SCOTT Commander Body Armor & Jacket prot.
EN 1621-2:2014
L | = 42.5-45 cm
FB
2
Personal Protection Equipment (PPE) designed and manufactured to
provide limited protection against the risks of impact in the event of a fall
SCOTT COMMANDER BACK PROT.
Included in SCOTT Commander Junior Body Armor
EN 1621-2:2014
S | = 35-39 cm
FB
2
Stone Schield Elbow, forearm and shoulder guards
Personal Protection Equipment (PPE) designed and manufactured to
provide limited protection against the risks of impact in the event of a fall
SCOTT COMMANDER
STONE SHIELD
Included in SCOTT Commander
Body Armor & Jacket protector
EN 14021:2003
L | = 95-105 cm
Personal Protection Equipment (PPE) designed and manufactured to
provide limited protection against the risks of impact in the event of a fall
SCOTT COMMANDER ELBOW
SCOTT COMMANDER SHOULDER
Included in SCOTT Commander Jacket protector
EN 1621-2:2012
'E'+'S'
'E'+'S' Type A
1
Elbow guards
Personal Protection Equipment (PPE) designed
and manufactured to provide limited protection
against the risks of impact in the event of a fall
SCOTT COMMANDER
ELBOW GUARDS
EN 1621-1:2012
'E'
L-XL
'E' Type A
1
The label contains the following
SCOTT COMMANDER
BACK PROTECTOR
Name of the model of the product
The CE marking ensures compliance with the essential
requirements of Directive 89/686/EEC
MPRO_16_MANUAL_Commander_V3.indd 6 17.11.15 14:06