EasyManua.ls Logo

SCOTT DJX 480 PK - User Manual

SCOTT DJX 480 PK
45 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
10 Converse fastening nut 16
9 Bolt jacket 16
8 Bolt M6×1.6×16 16
7 Bolt M6×1.0×5 12
6 Left side frame 1
5 Cross beam 4
4 Microphone bear frame 1
3 Right side frame 1
2 Side cover 4
1 Wheel 4
Serial number Description Specification QTY
DJ-ST assemble sketch
Should you have any questions/doubts on operating the unit, please send an e-mail to djtech@first-audio.com.
GB-1

Table of Contents

Questions and Answers

  • W
    Wesley YoungAug 10, 2025
    Why does my SCOTT DJX 480 PK have no sound?
    • A
      Amber GarrettAug 10, 2025
      If your Scott Music Mixer has no sound, it might be due to several reasons. First, ensure the power plug is correctly positioned. Next, verify the speaker connections and the input/output wires. A short-circuit in the speaker terminal could also be the culprit, so make sure the speakers are properly connected before turning on the unit. Finally, check that the volume isn't set to the minimum and adjust accordingly.
  • M
    Molly DeanAug 18, 2025
    What to do if there is no sound from one speaker of Scott Music Mixer?
    • M
      Mr. Stephen EstradaAug 18, 2025
      If you're getting sound from only one speaker on your Scott Music Mixer, the issue could stem from the speaker connections. Double-check that all speakers are properly connected. Also, verify that the balance or relative electric level isn't adjusted to favor only one speaker. Adjusting these settings should help resolve the problem.
  • E
    Edward StanleyAug 26, 2025
    Why does my Scott Music Mixer make a "hum" sound or low-frequency noise?
    • S
      Shawn HamiltonAug 26, 2025
      A hum or low-frequency noise from your Scott Music Mixer typically indicates a grounding issue. Reconnect the ground wire securely and inspect the signal wire to ensure it's properly connected. This should eliminate the unwanted noise.
  • J
    Joseph WeaverSep 2, 2025
    How to fix no bass phase-shifting of the loudspeaker on SCOTT DJX 480 PK?
    • T
      tammyjimenezSep 2, 2025
      If your Scott Music Mixer's loudspeaker is experiencing bass phase-shifting, it's likely due to the speaker connections. Specifically, check that the anode and cathode are correctly connected for each speaker. If one speaker has these connections reversed, correct them to restore proper bass performance.

SCOTT DJX 480 PK Specifications

General IconGeneral
BrandSCOTT
ModelDJX 480 PK
CategoryMusic Mixer
LanguageEnglish