As long as the pitch control is in the “normal” center position, the turntable turns at the selected speed using the SPEED
33 or SPEED 45 button.
The speed can be increased or decreased by 10% using the pitch control.
An incorrect adjustment can be done on purpose in order to have the turntable rotating extremely slow or fast.
The strobe dots at the edge of the turntable are used for speed monitoring.
Clean the stylus periodically with a soft brush to prevent the accumulation of dust.
When sound becomes distorted or noisy, check the stylus. If the stylus is worn out, replace it with a new one.
From time to time, the dust cover and turntable cabinet should be wiped down with a soft, dry cloth.
Volatile materials such as: alcohol, thinner, benzene etc. should not be used as they may remove the paint or damage
the luster.
1. 45-rpm Adaptor
This adapter allows you to play standard 7” EP vinyl
records with large center holes. Place the adapter on
the CENTER SPINDLE 7" records.
2. Turntable Platter
This platter has a center spindle. The platter and
center spindle ensure that a vinyl record is perfectly
centered. The platter also spins the record at a
consistent speed.
3. Strobe Indicators
The platter has four rows of indicators. These
indicators are used to visually detail various stages of
pitch. The indicators are illuminated by a strobe lamp.
Note: The use of heavy fluorescent lighting directly
above the turntable will affect the accuracy of this
function.
CHANGING THE SPEED
MAINTENANCE
CONTROLS OVERVIEW
To Next Page
Loading...
Need help?
Power
Turntable Section
Weight and Dimensions