SCOTT GENIUS 920 User Manual

ENGLISH
| 50
OWNER’S MANUAL 2021 | GENERAL MANUAL
•
SCOTT SERVICE AND MAINTENANCE SCHEDULE
It is advisable to have your SCOTT bike serviced regularly after the bedding-in
phase. The schedule given in the table below is a rough guide for cyclists who ride
their bike between 1,000 and 2,000 km or 50 to 100 hours of use a year.
If you consistently ride more or if you ride a great deal on poor road surfaces, the
maintenance periods of the SCOTT service plan will shorten accordingly.
WARNING
For your own safety, bring your SCOTT bike to your SCOTT dealer for its first
inspection after 100 to 300 kilometres, 5 to 15 hours of initial use or four to
six weeks, and at the very latest after three months.
SAFETY INSTRUCTIONS
For more information see the chapter “SCOTT service and maintenance
schedule” in your detailed original SCOTT operating instructions “Trekking
and Trekking-Pedelec”, “MTB and MTB-Pedelec” and “Road Bike” on the
SCOTT web page, your model specific manual and in the manuals of the com-
ponent manufacturers. For additional information on your bicycle and the
web links for the component manufacturers, please visit the manual pages of
the bike brand you have purchased via your Quick Start Manual.

SCOTT GENIUS 920 Specifications

General

Seat	Syncros Tofino 2.5 Regular
Frame	148x12mm Boost
Fork	44mm offset
Rear Shock	150mm travel
Drivetrain	SRAM NX Eagle 12-speed
Wheelset	30mm inner width, tubeless ready
Handlebar	780mm
Seatpost	150mm
Remote System	SCOTT TwinLoc Suspension System
Rear Derailleur	SRAM NX Eagle
Shifters	SRAM X01 Eagle, 12-speed
Crankset	32T
BB-Set	SRAM DUB
Chain	SRAM NX Eagle
H'stem	31.8mm
Headset	Syncros
Hub (Front)	Syncros Revelstoke 2.0, 15x110mm
Hub (Rear)	Syncros Revelstoke 2.0, 12x148mm
Rims	Syncros Revelstoke 2.0, 30mm inner width, tubeless ready