15
ENGLISH / SPARK TECH MANUAL
Please be aware that the maximum bolt length for the bottle cage on the seat tube is
10mm. The rivet nuts have closed ends, and using a longer bolt may result in damage
to the frame.
Size small frames you
can only fit one
bottle cage & bottle
(max 650ml)
If you are unsure of any of the following steps please take you bike
to an Authorised Scott Dealer for assistance. Do not try to undertake
the work yourself as this could cause damage to your bike, and may
cause an accident if incorrect assembled/dis-assembled or set-up is
followed.
Basic Shock Pump Set -Up:
A Scott Shock pump has a special valve head and the following steps should be
followed to make sure the correct pressure is applied.
Please note the air will flow into the hose and gauge when counterchecking the air
pressure. This will give the appearance that the shock has less air pressure, your
shock may need to be adjusted.
Please also note that the indicators of shock pumps have a tolerance of max. 10%.
To access the shock first
remove the cover.
To Next Page
Loading...
Need help?
General
