16
ENGLISH / SPARK TECH MANUAL
01
02
03
04
05
Attach the upper shock pump head to the
shock valve, making sure the lower part of the
pump head stays in the lower position.
Do not screw upwards together.
Then screw the lower pump head upto the
base of the upper shock pump head.
Make sure there is no gap between the two
shock pump heads. Then pump the air to the
required pressure.
Once the required pressure has been reached,
unscrew the lower shock pump head first.
Making sure the upper part stays in position.
Unscrew the upper shock pump head from the
shock valve.
Please follow the below steps depending on which shock pump type you have.
5 step or second 3 step.
To Next Page
Loading...
Need help?
General
