To Next PageTo Next Page
Need help?Do you have a question about the Scotts 51519S and is the answer not in the manual?
General| Cutting Width | 21 in |
|---|---|
| Weight | 67 lbs |
| Deck Material | Steel |
| Engine Type | 4-Cycle |
| Grass Bag Capacity | 1.9 bushels |
| Power Source | Gas |
| Cutting Height | 1.25 - 3.75 inches |
| Wheel Size | 7 in (front) / 8 in (rear) |
This product requires assembly. Carefully remove product and accessories from the box.
This product may be used for mowing your lawn.
Insert cord end, connect to power source, and secure on retainer.
Connect to power, press start button, pull lever to start; release lever to stop.
Clear area, cut 1/3 grass, walk steadily, avoid wet grass, clean deck.
Stop mower, disconnect power, lift door, remove catcher, empty clippings.
Avoid solvents, use clean cloths, keep parts tight, inspect for damage.
Bearings are pre-lubricated for life. No further lubrication is required.
Stop motor, disconnect power, turn mower on side, wedge wood, loosen nut, remove blade.
Remove blade, sharpen edges equally with file/stone. Check balance.
Check blade balance on screwdriver. Sharpen heavy side if needed.
Disconnect power, clean, store indoors in dry place away from children.
Record model/serial number. Mention model when ordering parts.
Contact for operating/maintenance questions via phone or website.
